Call
Sewing machine service for production floors and vendors — A&A Sewing Machines, Glendale
Corporate & production

Sewing machine service for production floors and vendors

Cut-and-sew rooms, apparel brands, uniform companies, upholstery shops, manufacturers and studios. When a machine stops, the line stops — so we keep yours running.

Call 818-409-0987 Directions
Call the shop Directions Set up a shop account

Visits are by appointment — call 818-409-0987 before you drive over so a technician is there for you.

Industrial sewing

The floors we keep sewing.

Industrial machines break differently depending on what they are asked to sew. These are the industries we work with across Los Angeles — and what we set the machines up for.

Aerospace & defense Parachutes, restraints, insulation blankets, cargo nets Automotive & marine Seat covers, headliners, convertible tops, boat canvas Furniture & contract Residential, contract and hospitality upholstery Apparel & cut-and-sew Sample rooms, small-run factories, production lines Uniforms & workwear Uniform companies, workwear brands, name tapes Awnings & covers Awnings, shade sails, tents, truck and equipment covers Medical & technical Braces, supports, slings, filtration, technical textiles Leather goods & bags Bags, belts, holsters, harness, footwear Outdoor & sports gear Packs, tents, safety harness, climbing and tactical

Not on the list? We have almost certainly had the machine on the bench. Call 818-409-0987.

Take a look inside

See the shop before you come.

Forty years of industrial machines and the people who fix them, in one building in Glendale. Watch, then call — we take it from there.

Inside A&A Sewing Machines — Glendale, California Watch — A&A Sewing Machines, Glendale
Call 818-409-0987 Send a request instead
Find it fast

Find your machine.

Type the brand or the model number off the plate — “Juki”, “DDL-8700”, “Consew 206RB”, “Brother”. We service every brand on this list and plenty that are not.

Tap your machine and tell us what it’s doing. Leave your name, a number and how soon you need it running. We call you back with what the repair looks like — or what we’d put on your floor instead.

Machine not listed? We almost certainly still work on it. Forty years means most machines that come through the door are ones we have seen before. Tell us the make and what it is doing, or call the shop with the model number off the plate.
Call 818-409-0987
Your machine Your part Tell us what you need and leave a number — we call you back with the repair, the cost, or what we’d put on your floor.

Rough is fine — it saves us a phone call.

Or call 818-409-0987

Goes straight to the shop. No list, no newsletter — just a call back about your machine.

What’s included

What you get

Scheduled preventive maintenance across your whole floor

Emergency call-outs when production goes down

Standing parts orders for the failures you see most

Servo conversions, rewiring, tables and relocation

W-9, COI and vendor onboarding paperwork handled

Set up an account

Account shops get priority turnaround, account pricing on parts and a maintenance schedule instead of a queue of emergencies. Send a request with your machine count and location, or call the shop.

Service call fee

On-site visits carry a service call fee that varies with location and machine count. We quote it on the phone before scheduling. Machines brought to the Glendale warehouse have no call-out charge.

Brands we service every week

SingerJukiBrotherBerninaJanomePfaffConsewHusqvarna VikingKenmoreAdlerBaby LockElnaNecchiJaguarToyota
Send it over

Industrial machine repair. New and used machines.

We keep production floors sewing. Repair and service for industrial machines — on your floor or on our bench — and industrial machines for sale, new and used, spec’d and set up running. Cut-and-sew rooms, upholstery shops, uniform companies, wardrobe departments. Everything here lands in the shop inbox. Line down? Call 818-409-0987 — always faster.

1 · Machine
2 · Problem
3 · You

What’s the machine doing?

none picked

Tap anything that sounds right. Not sure what it’s called? Type it below in your own words — that works just as well.

Rough is fine — it saves us a phone call.

Bringing it in has no call-out charge. On-site visits carry a service call fee.

It is usually on a plate or sticker on the body. Skip it if you cannot find it — that is fine.

Last bit — this is just so we can send you the estimate and let you know when it’s ready. We don’t add you to any list.

Your phone will offer your saved address — tap it and the rest fills itself in.

Just one more thing needed above before we can continue.

The estimate is free. This goes straight to the shop.

1 · The work
2 · Machine
3 · You
New industrial machines, set up and ready to sew. We order in new industrial heads — single needle, walking foot, overlock, bar tack, cylinder arm and the rest — with the table, stand and motor to match, delivered and set up running. Tell us the job and we will spec it.

Last bit — this is just so we can send you the estimate and let you know when it’s ready. We don’t add you to any list.

Your phone will offer your saved address — tap it and the rest fills itself in.

Just one more thing needed above before we can continue.

This goes straight to the shop. We read every one.

1 · The work
2 · Machine
3 · You
Used industrial machines, serviced and test-sewn. Nothing goes on the floor until it has been stripped, serviced and sewn off. Stock changes weekly, so tell us what you need and we will tell you what we have and what is coming in.

Last bit — this is just so we can send you the estimate and let you know when it’s ready. We don’t add you to any list.

Your phone will offer your saved address — tap it and the rest fills itself in.

Just one more thing needed above before we can continue.

This goes straight to the shop. We read every one.

Straight answers

Questions about this

Do you service whole floors on a schedule?

Yes. Preventive maintenance contracts are the whole point — shops on a schedule call us far less often in an emergency.

Can you handle vendor onboarding paperwork?

Yes. W-9, certificate of insurance and vendor forms are routine for us.

How fast can you get to us?

Call with your location and machine count and we will tell you honestly, including the service call fee, before anything is scheduled.

Come by

4551 San Fernando Rd, Unit 218

By appointment — call 818-409-0987 before you drive over so a technician is there for you.

Warehouse4551 San Fernando Rd, Unit 218
Glendale, CA 91204
Get directions

Sewing machine service for production floors and vendors?

Call the shop. Free estimate, straight answer, no runaround.

Call 818-409-0987 Set up a shop account
818-409-0987 Directions