Call
Awning, tent and industrial cover machine service — A&A Sewing Machines, Glendale
Awnings, tents & covers

Awning, tent and industrial cover machine service

Awnings, shade sails, tents, truck and equipment covers, pool and patio covers. Big panels, heavy coated fabric and long straight seams.

Call 818-409-0987 Directions
Call the shop Directions Send a request

Visits are by appointment — call 818-409-0987 before you drive over so a technician is there for you.

Take a look inside

See the shop before you come.

Forty years of industrial machines and the people who fix them, in one building in Glendale. Watch, then call — we take it from there.

Inside A&A Sewing Machines — Glendale, California Watch — A&A Sewing Machines, Glendale
Call 818-409-0987 Send a request instead
Find it fast

Find your machine.

Type the brand or the model number off the plate — “Juki”, “DDL-8700”, “Consew 206RB”, “Brother”. We service every brand on this list and plenty that are not.

Tap your machine and tell us what it’s doing. Leave your name, a number and how soon you need it running. We call you back with what the repair looks like — or what we’d put on your floor instead.

Machine not listed? We almost certainly still work on it. Forty years means most machines that come through the door are ones we have seen before. Tell us the make and what it is doing, or call the shop with the model number off the plate.
Call 818-409-0987
Your machine Your part Tell us what you need and leave a number — we call you back with the repair, the cost, or what we’d put on your floor.

Rough is fine — it saves us a phone call.

Or call 818-409-0987

Goes straight to the shop. No list, no newsletter — just a call back about your machine.

Machines we keep running

Long-arm walking foot for large panels. Heavy zigzag for reinforcement and webbing. Table and stand setups sized for oversized work. Servo motors so a single operator can control a big panel.

What usually goes wrong

Feed slipping on vinyl-coated polyester. Needle deflection through webbing and grommet reinforcement. Hook timing after heavy stack-ups. Motors underpowered for the material.

Brands we service every week

SingerJukiBrotherBerninaJanomePfaffConsewHusqvarna VikingKenmoreAdlerBaby LockElnaNecchiJaguarToyota
Send it over

Industrial machine repair. New and used machines.

We keep production floors sewing. Repair and service for industrial machines — on your floor or on our bench — and industrial machines for sale, new and used, spec’d and set up running. Cut-and-sew rooms, upholstery shops, uniform companies, wardrobe departments. Everything here lands in the shop inbox. Line down? Call 818-409-0987 — always faster.

1 · Machine
2 · Problem
3 · You

What’s the machine doing?

none picked

Tap anything that sounds right. Not sure what it’s called? Type it below in your own words — that works just as well.

Rough is fine — it saves us a phone call.

Bringing it in has no call-out charge. On-site visits carry a service call fee.

It is usually on a plate or sticker on the body. Skip it if you cannot find it — that is fine.

Last bit — this is just so we can send you the estimate and let you know when it’s ready. We don’t add you to any list.

Your phone will offer your saved address — tap it and the rest fills itself in.

Just one more thing needed above before we can continue.

The estimate is free. This goes straight to the shop.

1 · The work
2 · Machine
3 · You
New industrial machines, set up and ready to sew. We order in new industrial heads — single needle, walking foot, overlock, bar tack, cylinder arm and the rest — with the table, stand and motor to match, delivered and set up running. Tell us the job and we will spec it.

Last bit — this is just so we can send you the estimate and let you know when it’s ready. We don’t add you to any list.

Your phone will offer your saved address — tap it and the rest fills itself in.

Just one more thing needed above before we can continue.

This goes straight to the shop. We read every one.

1 · The work
2 · Machine
3 · You
Used industrial machines, serviced and test-sewn. Nothing goes on the floor until it has been stripped, serviced and sewn off. Stock changes weekly, so tell us what you need and we will tell you what we have and what is coming in.

Last bit — this is just so we can send you the estimate and let you know when it’s ready. We don’t add you to any list.

Your phone will offer your saved address — tap it and the rest fills itself in.

Just one more thing needed above before we can continue.

This goes straight to the shop. We read every one.

Straight answers

Questions about this

Can you service a long-arm machine on our floor?

Yes. Long-arm and heavy cover machines are usually easier to service in place, and we cover Los Angeles County on-site.

What needle and thread should we run on marine acrylic?

It depends on the cloth weight and the seam. Tell us what you are sewing and we will spec the needle system, point and thread when we set the machine up.

Come by

4551 San Fernando Rd, Unit 218

By appointment — call 818-409-0987 before you drive over so a technician is there for you.

Warehouse4551 San Fernando Rd, Unit 218
Glendale, CA 91204
Get directions

Awning, tent and industrial cover machine service?

Call the shop. Free estimate, straight answer, no runaround.

Call 818-409-0987 Send a request
818-409-0987 Directions