Call
Automotive and marine upholstery machine service — A&A Sewing Machines, Glendale
Automotive & marine

Automotive and marine upholstery machine service

Seat covers, headliners, convertible tops, boat canvas, biminis and custom interiors. Vinyl, marine-grade acrylic and heavy leather need a machine that feeds without slipping and a stitch that holds up in the sun.

Call 818-409-0987 Directions
Call the shop Directions Send a request

Visits are by appointment — call 818-409-0987 before you drive over so a technician is there for you.

Take a look inside

See the shop before you come.

Forty years of industrial machines and the people who fix them, in one building in Glendale. Watch, then call — we take it from there.

Inside A&A Sewing Machines — Glendale, California Watch — A&A Sewing Machines, Glendale
Call 818-409-0987 Send a request instead
Find it fast

Find your machine.

Type the brand or the model number off the plate — “Juki”, “DDL-8700”, “Consew 206RB”, “Brother”. We service every brand on this list and plenty that are not.

Tap your machine and tell us what it’s doing. Leave your name, a number and how soon you need it running. We call you back with what the repair looks like — or what we’d put on your floor instead.

Machine not listed? We almost certainly still work on it. Forty years means most machines that come through the door are ones we have seen before. Tell us the make and what it is doing, or call the shop with the model number off the plate.
Call 818-409-0987
Your machine Your part Tell us what you need and leave a number — we call you back with the repair, the cost, or what we’d put on your floor.

Rough is fine — it saves us a phone call.

Or call 818-409-0987

Goes straight to the shop. No list, no newsletter — just a call back about your machine.

Machines we keep running

Walking foot and triple feed for vinyl and leather. Long-arm and cylinder arm for tops and covers. Heavy-duty binders. Servo motors with speed reducers for controlled work on thick seams.

What usually goes wrong

Skipped stitches in vinyl from the wrong needle point. Feed marks on soft leather. Belt and clutch motors running too fast for detail work. Hook timing off after heavy stack-ups.

Brands we service every week

SingerJukiBrotherBerninaJanomePfaffConsewHusqvarna VikingKenmoreAdlerBaby LockElnaNecchiJaguarToyota
Send it over

Industrial machine repair. New and used machines.

We keep production floors sewing. Repair and service for industrial machines — on your floor or on our bench — and industrial machines for sale, new and used, spec’d and set up running. Cut-and-sew rooms, upholstery shops, uniform companies, wardrobe departments. Everything here lands in the shop inbox. Line down? Call 818-409-0987 — always faster.

1 · Machine
2 · Problem
3 · You

What’s the machine doing?

none picked

Tap anything that sounds right. Not sure what it’s called? Type it below in your own words — that works just as well.

Rough is fine — it saves us a phone call.

Bringing it in has no call-out charge. On-site visits carry a service call fee.

It is usually on a plate or sticker on the body. Skip it if you cannot find it — that is fine.

Last bit — this is just so we can send you the estimate and let you know when it’s ready. We don’t add you to any list.

Your phone will offer your saved address — tap it and the rest fills itself in.

Just one more thing needed above before we can continue.

The estimate is free. This goes straight to the shop.

1 · The work
2 · Machine
3 · You
New industrial machines, set up and ready to sew. We order in new industrial heads — single needle, walking foot, overlock, bar tack, cylinder arm and the rest — with the table, stand and motor to match, delivered and set up running. Tell us the job and we will spec it.

Last bit — this is just so we can send you the estimate and let you know when it’s ready. We don’t add you to any list.

Your phone will offer your saved address — tap it and the rest fills itself in.

Just one more thing needed above before we can continue.

This goes straight to the shop. We read every one.

1 · The work
2 · Machine
3 · You
Used industrial machines, serviced and test-sewn. Nothing goes on the floor until it has been stripped, serviced and sewn off. Stock changes weekly, so tell us what you need and we will tell you what we have and what is coming in.

Last bit — this is just so we can send you the estimate and let you know when it’s ready. We don’t add you to any list.

Your phone will offer your saved address — tap it and the rest fills itself in.

Just one more thing needed above before we can continue.

This goes straight to the shop. We read every one.

Straight answers

Questions about this

Do you convert clutch motors to servo?

Yes — that is one of the most common jobs we do, and it is usually the single biggest improvement for upholstery work.

Come by

4551 San Fernando Rd, Unit 218

By appointment — call 818-409-0987 before you drive over so a technician is there for you.

Warehouse4551 San Fernando Rd, Unit 218
Glendale, CA 91204
Get directions

Automotive and marine upholstery machine service?

Call the shop. Free estimate, straight answer, no runaround.

Call 818-409-0987 Send a request
818-409-0987 Directions