Call
Vintage & heirloom sewing machine restoration — A&A Sewing Machines, Glendale
Vintage

Vintage & heirloom sewing machine restoration

A Singer Featherweight, a 15-91 in a cabinet, a Necchi Supernova, a treadle that has not turned in thirty years. All-metal machines were built to be repaired, and most of them still can be.

Call 818-409-0987 Directions
Call the shop Directions Send a request

Visits are by appointment — call 818-409-0987 before you drive over so a technician is there for you.

Industrial sewing

The floors we keep sewing.

Industrial machines break differently depending on what they are asked to sew. These are the industries we work with across Los Angeles — and what we set the machines up for.

Aerospace & defense Parachutes, restraints, insulation blankets, cargo nets Automotive & marine Seat covers, headliners, convertible tops, boat canvas Furniture & contract Residential, contract and hospitality upholstery Apparel & cut-and-sew Sample rooms, small-run factories, production lines Uniforms & workwear Uniform companies, workwear brands, name tapes Awnings & covers Awnings, shade sails, tents, truck and equipment covers Medical & technical Braces, supports, slings, filtration, technical textiles Leather goods & bags Bags, belts, holsters, harness, footwear Outdoor & sports gear Packs, tents, safety harness, climbing and tactical

Not on the list? We have almost certainly had the machine on the bench. Call 818-409-0987.

Take a look inside

See the shop before you come.

Forty years of industrial machines and the people who fix them, in one building in Glendale. Watch, then call — we take it from there.

Inside A&A Sewing Machines — Glendale, California Watch — A&A Sewing Machines, Glendale
Call 818-409-0987 Send a request instead
Find it fast

Find your machine.

Type the brand or the model number off the plate — “Juki”, “DDL-8700”, “Consew 206RB”, “Brother”. We service every brand on this list and plenty that are not.

Tap your machine and tell us what it’s doing. Leave your name, a number and how soon you need it running. We call you back with what the repair looks like — or what we’d put on your floor instead.

Machine not listed? We almost certainly still work on it. Forty years means most machines that come through the door are ones we have seen before. Tell us the make and what it is doing, or call the shop with the model number off the plate.
Call 818-409-0987
Your machine Your part Tell us what you need and leave a number — we call you back with the repair, the cost, or what we’d put on your floor.

Rough is fine — it saves us a phone call.

Or call 818-409-0987

Goes straight to the shop. No list, no newsletter — just a call back about your machine.

What’s included

What you get

Seized machines freed and re-oiled

Wiring, motors and foot controls made safe

Timing and tension reset to spec

Cabinet hinges, knee lifters and treadle belts

Bobbin cases, shuttles and hard-to-find parts

Honest assessment of what is worth doing

Sentimental is a real reason

People bring us their mother's machine, and that matters. We will tell you what it needs and what it costs, and we will not pretend a machine is beyond help to sell you a new one.

Brands we service every week

SingerJukiBrotherBerninaJanomePfaffConsewHusqvarna VikingKenmoreAdlerBaby LockElnaNecchiJaguarToyota
Send it over

Industrial machine repair. New and used machines.

We keep production floors sewing. Repair and service for industrial machines — on your floor or on our bench — and industrial machines for sale, new and used, spec’d and set up running. Cut-and-sew rooms, upholstery shops, uniform companies, wardrobe departments. Everything here lands in the shop inbox. Line down? Call 818-409-0987 — always faster.

1 · Machine
2 · Problem
3 · You

What’s the machine doing?

none picked

Tap anything that sounds right. Not sure what it’s called? Type it below in your own words — that works just as well.

Rough is fine — it saves us a phone call.

Bringing it in has no call-out charge. On-site visits carry a service call fee.

It is usually on a plate or sticker on the body. Skip it if you cannot find it — that is fine.

Last bit — this is just so we can send you the estimate and let you know when it’s ready. We don’t add you to any list.

Your phone will offer your saved address — tap it and the rest fills itself in.

Just one more thing needed above before we can continue.

The estimate is free. This goes straight to the shop.

1 · The work
2 · Machine
3 · You
New industrial machines, set up and ready to sew. We order in new industrial heads — single needle, walking foot, overlock, bar tack, cylinder arm and the rest — with the table, stand and motor to match, delivered and set up running. Tell us the job and we will spec it.

Last bit — this is just so we can send you the estimate and let you know when it’s ready. We don’t add you to any list.

Your phone will offer your saved address — tap it and the rest fills itself in.

Just one more thing needed above before we can continue.

This goes straight to the shop. We read every one.

1 · The work
2 · Machine
3 · You
Used industrial machines, serviced and test-sewn. Nothing goes on the floor until it has been stripped, serviced and sewn off. Stock changes weekly, so tell us what you need and we will tell you what we have and what is coming in.

Last bit — this is just so we can send you the estimate and let you know when it’s ready. We don’t add you to any list.

Your phone will offer your saved address — tap it and the rest fills itself in.

Just one more thing needed above before we can continue.

This goes straight to the shop. We read every one.

Straight answers

Questions about this

Can you still get parts for old machines?

Often yes. Forty years of stock covers a lot of ground, and many vintage parts are still made. Bring the machine or the model number and we will check the shelf.

Is my old machine worth restoring?

Frequently, yes — all-metal machines from the 1950s to 70s outlast most modern ones. We will give you a straight answer before you spend anything.

Come by

4551 San Fernando Rd, Unit 218

By appointment — call 818-409-0987 before you drive over so a technician is there for you.

Warehouse4551 San Fernando Rd, Unit 218
Glendale, CA 91204
Get directions

Vintage & heirloom sewing machine restoration?

Call the shop. Free estimate, straight answer, no runaround.

Call 818-409-0987 Send a request
818-409-0987 Directions