Call
Outdoor and sports gear sewing machine service — A&A Sewing Machines, Glendale
Outdoor & sports gear

Outdoor and sports gear sewing machine service

Packs, tents, safety harness, climbing and tactical gear, sports equipment. Webbing, ripstop and laminates, with load-bearing stitching that has to hold.

Call 818-409-0987 Directions
Call the shop Directions Send a request

Visits are by appointment — call 818-409-0987 before you drive over so a technician is there for you.

Take a look inside

See the shop before you come.

Forty years of industrial machines and the people who fix them, in one building in Glendale. Watch, then call — we take it from there.

Inside A&A Sewing Machines — Glendale, California Watch — A&A Sewing Machines, Glendale
Call 818-409-0987 Send a request instead
Find it fast

Find your machine.

Type the brand or the model number off the plate — “Juki”, “DDL-8700”, “Consew 206RB”, “Brother”. We service every brand on this list and plenty that are not.

Tap your machine and tell us what it’s doing. Leave your name, a number and how soon you need it running. We call you back with what the repair looks like — or what we’d put on your floor instead.

Machine not listed? We almost certainly still work on it. Forty years means most machines that come through the door are ones we have seen before. Tell us the make and what it is doing, or call the shop with the model number off the plate.
Call 818-409-0987
Your machine Your part Tell us what you need and leave a number — we call you back with the repair, the cost, or what we’d put on your floor.

Rough is fine — it saves us a phone call.

Or call 818-409-0987

Goes straight to the shop. No list, no newsletter — just a call back about your machine.

Machines we keep running

Bar tack for load-bearing terminations. Walking foot for laminates and coated nylon. Zigzag for webbing. Cylinder arm for tubular and awkward assemblies.

What usually goes wrong

Bar tack pattern and knife adjustment. Needle deflection through layered webbing. Feed slipping on silicone-treated nylon. Thread breakage from worn guides.

Brands we service every week

SingerJukiBrotherBerninaJanomePfaffConsewHusqvarna VikingKenmoreAdlerBaby LockElnaNecchiJaguarToyota
Send it over

Industrial machine repair. New and used machines.

We keep production floors sewing. Repair and service for industrial machines — on your floor or on our bench — and industrial machines for sale, new and used, spec’d and set up running. Cut-and-sew rooms, upholstery shops, uniform companies, wardrobe departments. Everything here lands in the shop inbox. Line down? Call 818-409-0987 — always faster.

1 · Machine
2 · Problem
3 · You

What’s the machine doing?

none picked

Tap anything that sounds right. Not sure what it’s called? Type it below in your own words — that works just as well.

Rough is fine — it saves us a phone call.

Bringing it in has no call-out charge. On-site visits carry a service call fee.

It is usually on a plate or sticker on the body. Skip it if you cannot find it — that is fine.

Last bit — this is just so we can send you the estimate and let you know when it’s ready. We don’t add you to any list.

Your phone will offer your saved address — tap it and the rest fills itself in.

Just one more thing needed above before we can continue.

The estimate is free. This goes straight to the shop.

1 · The work
2 · Machine
3 · You
New industrial machines, set up and ready to sew. We order in new industrial heads — single needle, walking foot, overlock, bar tack, cylinder arm and the rest — with the table, stand and motor to match, delivered and set up running. Tell us the job and we will spec it.

Last bit — this is just so we can send you the estimate and let you know when it’s ready. We don’t add you to any list.

Your phone will offer your saved address — tap it and the rest fills itself in.

Just one more thing needed above before we can continue.

This goes straight to the shop. We read every one.

1 · The work
2 · Machine
3 · You
Used industrial machines, serviced and test-sewn. Nothing goes on the floor until it has been stripped, serviced and sewn off. Stock changes weekly, so tell us what you need and we will tell you what we have and what is coming in.

Last bit — this is just so we can send you the estimate and let you know when it’s ready. We don’t add you to any list.

Your phone will offer your saved address — tap it and the rest fills itself in.

Just one more thing needed above before we can continue.

This goes straight to the shop. We read every one.

Straight answers

Questions about this

Can you set a machine up for lightweight coated nylon?

Yes. Fine coated fabrics need a smaller needle system and lighter tension than most industrial machines ship with. We set it to the fabric you run.

Do you service bar tacks and heavy zigzag?

Yes. Bar tack and zigzag machines behind pack straps, harnesses and tie-downs are regular work.

Come by

4551 San Fernando Rd, Unit 218

By appointment — call 818-409-0987 before you drive over so a technician is there for you.

Warehouse4551 San Fernando Rd, Unit 218
Glendale, CA 91204
Get directions

Outdoor and sports gear sewing machine service?

Call the shop. Free estimate, straight answer, no runaround.

Call 818-409-0987 Send a request
818-409-0987 Directions