How To Properly Move Your Refrigerator When Cleaning – Sewing Machines Los Angeles

Cleaning is always a challenge. But when there are big and bulky appliances getting in your way, this becomes even more difficult. One of the areas that are usually neglected when homeowners clean their house is the area around the refrigerator. Moving the refrigerator out of the way can be taxing.

But this is a must if you don’t want dust and cobwebs to accumulate around the fridge. Not only is this unsanitary especially to an appliance that stores your food, this also speeds up the deterioration of your fridge.

Here is a guide on how to properly move your fridge so you can clean it and the area around it:

Step 1: Unplug the refrigerator. Open the door and place a chair close to the door to prevent it from closing. Remove the contents of the fridge and neatly organize them on the table or the kitchen countertop. Make sure you place perishable goods in a cooler to prevent them from contacting bacteria.

Step 2: Once you have already removed the food and contents of the fridge, remove the compartments next. Take out all the movable parts of your refrigerator.

Step 3: If your fridge is a no-frost fridge, you can proceed to the next step. If it is not, you should allow it to de-frost first as water can leak from the appliance. To speed up the defrosting process, use an electric fan to melt the ice deposits. Use an absorbent towel to remove the water inside.

Step 4: Use cords to tie the door shut. Although the magnetic materials of the door will secure it, it is still better to use cords to seal it shut. Fasten it around the fridge. Do not use masking tape or duct tape as this might damage the enamel or the glossy finish of the appliance.

Step 5: Ask someone to help you out. Slightly tilt the machine backward so your helper can slide carpet under it. You can pull the carpet with the fridge on top of it easily if you are using smooth flooring. However, if you already have carpet to begin with, you should slide plastic sheets underneath and slide it while the fridge is on top. While you are pulling it away from its place, someone should hold the fridge and push it a little bit.

Step 6: Now clean the area with a vacuum cleaner. Also get rid of the cobwebs found at the coils of the appliance. Make sure you clean the interior and exterior of the fridge before sliding it back to its place.

Step 7: Remove the cords and place the contents of the fridge back again.